Micca MB42X G2 Bookshelf Speaker
Where to Buy
EXPERIENCE GREAT SOUND
Step into an elevated realm of audio enjoyment with the Micca MB42X G2, the upgraded successor to the beloved MB42X bookshelf speakers. Built upon the original’s success, the MB42X G2 incorporates all-new components and refined design to deliver a rich and immersive listening experience for music, movies, and gaming.
Feature Highlights:
PURPOSEFUL DESIGN – The MB42X G2 is a harmonious blend of form and function. Its sleek, compact design seamlessly fits into any environment, from minimalist modern spaces to cozy home theaters, ensuring both auditory and visual satisfaction. But the real magic lies within its components, meticulously selected and woven together to exceed your audio expectations.
A CLASSIC REBORN – The heart of the MB42X G2 lies in its updated audio drivers. A reimagined 4-inch carbon fiber woofer takes a commanding presence, delivering an enhanced bass response that’s both deep and articulate. Complementing this prowess is a revamped 0.75-inch silk dome tweeter, effortlessly producing crystalline highs with clarity and finesse.
NEUTRAL HARMONY – The soul of the MB42X G2 is imbued within its crossover. With painstaking attention to detail, the engineers at Micca have achieved a more neutral tonal signature and coherent time alignment, ensuring that every instrument, vocal, and sound effect is reproduced faithfully. Immerse yourself in audio that’s true to the artist’s intent.
- Woofer: 4″ Carbon Fiber, Rubber Surround
- Tweeter: 0.75″ Silk Dome
- Crossover: 12dB/Octave
- Enclosure: Ported
- Frequency Response: 55Hz-20kHz
- Impedance: 4-8 Ohms
- Sensitivity: 86dB 1W/1M
- Power Handling: 80 Watts (Each)
- Dimensions: 9.5″ (H) x 5.8″ (W) x 6.5″ (D)
What’s Included:
- Micca MB42X G2 Speakers
- Rubber feet
- User’s manual
User’s Manual:
Micca MB42X G2 User’s Manual (opens in a new tab/window)
Micca MB42X G2 User’s ManualMicca MB42X
Why is the impedance 4-8 Ohms? Will it work with my receiver?
Micca is one of the few manufacturers that specifies the impedance of its speakers as a range, rather than a fixed nominal value. The impedance of a speaker varies depending on the frequency being played, and it is normal for most 8ohm rated speakers have impedance that dip as low as 4ohms or even lower.
While the Micca speakers work just fine with most amplifiers and receivers rated for speakers designed to handle 6ohm or 8ohm speakers, the 4-8ohm rating is a reminder to users that these speakers do have impedance that go down to as low as 4ohms and care should be taken with the listening volume so as not to damage the amplifier or speakers. Please observe the following precautions:
- Do not play the speakers at a volume where there is audible distortion
- If the amplifier’s output protection is triggered, immediately discontinue use
- Ensure that the amplifier has plenty of ventilation and is not in an enclosed space
- If the amplifier has a “4Ohm” or “High Current” mode, enable it
Posted in: Micca MB42, Micca MB42-C, Micca MB42X, Micca MB42X-C
Different versions of Micca MB42X and MB42X-C: Original, MKII, MKIII
At Micca, we continuously look for ways to improve our products for better performance, quality, and value. Since introduction, MB42X and MB42X-C speakers have undergone evolutionary updates as described below:
Original Release – Based on MB42, with the following differences
- 8-element 12dB/Octave crossover upgrade
- Matte black vinyl
- Magnetic grill system.
MKII – Serial numbers start with “MB42XMKII” or “MB42XCMKII”.
- Slight adjustments to woofer and tweeter response characteristics
- Flared plastic port tube (MB42X only)
- Additional internal bracing at four side enclosure walls
- Poly fill stuffing added
MKIII – Serial numbers start with “MB42X3” or “MB42XC3”
- 9-element 18dB/Octave crossover
- Tighter driver response tolerance
MKIII crossovers are backwards compatible with all previous versions and provides the following benefits:
- Steeper slopes for reduced distortion and acoustic lobing
- Adjusted roll off frequency for improved phase integration
- Updated driver level matching to result in overall smoother response
Posted in: Micca MB42X, Micca MB42X-C
Micca MB42 vs MB42X, What’s the difference?
When it comes to the MB42 vs MB42X decision, it’s important to understand the similarities and differences between these two speakers. We hope this guide is helpful in making the right purchase choice.
Similarties
The MB42 and MB42X uses the same drivers, consisting of a 4-inch carbon fiber woofer, and 0.75-inch silk dome tweeter. Both use the same size enclosure and the same tuning frequency. With their grills on, it is difficult to tell them apart visually from a few feet away.
Differences
Even though the MB42 and MB42X share the same drivers and enclosure design, the MB42X represents a sizable upgrade in terms of audio performance. The most significant improvement offered by the MB42X over the MB42 is the inclusion of a 9-element crossover network. This crossover significantly improves the tonal balance and clarity of the speaker and is what’s responsible for the MB42X being such a favorite among hi-fi enthusiasts. There are also other improvements included in the MB42X, such as a flared port tube and a magnetic grill system. Lastly there is the cosmetic difference of a matte black finish on the MB42X, versus the black faux wood grain on the MB42.
The table below contains the differences between the MB42 and MB42X.
| MB42 | MB42X | |
| Woofer | 4-Inch Fiber Woofer | 4-Inch Fiber Woofer |
| Tweeter | 0.75-Inch Silk Dome | 0.75-Inch Silk Dome |
| Crossover | None, protective capacitor on tweeter | Advanced 9-element crossover, 18dB/Octave woofer and tweeter |
| Enclosure material | MDF | MDF |
| Enclosure Finish | Black faux wood grain vinyl | Matte black vinyl |
| Tuned Port | Cardboard tube | Plastic tube, external flare |
| Protective Grill | Cloth, peg mount | Cloth, magnetic mount |
Posted in: Micca MB42, Micca MB42X